The Pusher 3.5" MEGA Intake System with replaces your stock post-intercooler piping and intake manifold with 3.5" mandrel bent tubing, increasing the flow efficiency of your charge system by 55%.

This system includes heavy-duty 5-ply couplers to replace the factory boots, stainless steel T-bolt clamps, and full-color instructions with pictures.

Intercooler Compatibility: This product was designed to work with the factory intercooler, and as such will work with aftermarket intercoolers that mimic the factory inlet / outlet locations. If you have an aftermarket intercooler that differs from that, please call for compatibility.

• Full steel construction consisting of 3.5" mandrel bent tubing, a 1/2" thick flange, and 1/4" thick dipstick mounting bracket
• Fully TIG welded with precise settings to produce optimal penetration without impacting airflow
• 50-200 degrees F drop in EGT's 0.5-1 MPG increase
• Increased throttle response
• Faster turbo spool

What’s in the box?

(1) DC0307MIM | Pusher 3.5" MEGA Intake Manifold
(1) DC0307MBT | Pusher 3.5" MEGA Driver-side Charge Tube
(1) PSR35-3 | 3.5 - 3" Black 5-Ply Silicone Coupler, Reducer
(1) PSS35 | 3.5" Black 5-Ply Silicone Coupler, Straight
(3) TC_3.5 | 3.5" Stainless T-Bolt Clamp
(1) TC_3 | 3" Stainless T-Bolt Clamp
(1) 59C IMS Gasket | 5.9L Cummins Intake Manifold Gasket
(1) M8 Locking Nut
(Optional) 1/8" NPT Port Plugs
(5) 5/16" Washers