2003-2007 24-Valve Cummins

Click to read: The 101 on Compound Turbo Systems: Our FAQs Answered The Pusher High Mount Compound Turbo System for your 2003-2007 Dodge 5.9L Cummins allows you to add a second turbocharger to your truck, supporting up to 750hp with the stock Holset...

The Pusher 3.5" Mega Intake System with Cross-Air replaces all of your 3” factory post intercooler plumbing and intake manifold with 3.5” mandrel bent tubing, heavy duty 5-ply silicone couplers and stainless T-bolt clamps. This system...

The Pusher 3.5" MEGA Intake System with our 3.5" Passenger Side Intercooler Tube replaces all three of the pre- and post- intercooler piping and stock intake manifold with 3.5" mandrel bent tubing, dramatically increasing the flow efficiency of your...

The Pusher 3.5" MEGA Intake System with replaces your stock post-intercooler piping and intake manifold with 3.5" mandrel bent tubing, increasing the flow efficiency of your charge system by 55%. This system includes heavy-duty 5-ply couplers to replace...

Combine a Pusher 3" Intake Manifold and 3" Cross-Air and save $25! This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the front...

Pusher 3" Cross-Air for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks. The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your front and rear...

Our 3.5" MEGA Passenger Side Intercooler Tube for your 03-07 Dodge 5.9L Cummins is a perfect compliment to our 3.5" Pusher MEGA Intake System. By replacing the anemic 2.75" stock intercooler tube you'll lower EGTs while increasing fuel economy, throttle...

Pusher Straight Shot Transmission Dipstick Tube for 48RE This transmission dipstick tube was designed out of necessity for more room in the rear passenger side area of the 2003-2007 Dodge Cummins engine bay. The OEM dipstick tube is routed directly...

Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks. All Pusher intake manifolds can be used with or without the factory heater grid. Fully TIG welded, 3" mandrel bent tubing, with a 1/2" thick flange and 1/4"...

Brand new factory Cummins Heater Grid for 5.9L engines.

Stock replacement driver-side intercooler tube for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.   The Pusher Stock Driver-Side Intercooler Tube replaces the failure prone OEM charge tube with a fully machined, mandrel bent, and...

We have designed, refined and tested our filter's geometry over several years - and across a broad range of conditions and vehicle configurations - to fine tune and perfect their durability. The inverted cone end cap maximizes filter media, catching more...

This product is not emissions compliant. Off-road use only. Pusher Aluminum Grid Heater Delete for Cummins 5.9L turbo diesel engines in 1989 - 2007 Dodge Ram trucks. Fully machined from 6061-T6 aluminum Finished in Pusher's signature titanium anodizing...

APPS Relocation Bracket for use with 2003-2007 Cummins Cross-Air.

Brand new factory Cummins Intake Manifold Gasket for 5.9L engines.