Pusher HD 3" Cold Side Charge Tube for 2011-16 Ford F250/350 6.7L Powerstroke w/ Throttle Valve Adapter

$319.99
SKU:
PFP1116BTA
Weight:
11.00 LBS
tooltip|powder-coat:
All steel products must be coated prior to installation. See “Powder Coating 101” under Articles for more information.
tooltip|Ports:
This product features 1/8" FNPT threaded ports for auxiliary sensors / injectors. Each port comes with an anodized aluminum plug so you can seal off ports not in use. The majority of our customers select the standard no port option.
Current stock: 0
Description

Description

Emissions Compatible: The Pusher HD 3" Cold Side Charge Tube with Throttle Valve Adapter for 2011-16 Ford F250/350 6.7L Powerstroke

The Pusher HD 3" Cold Side Charge Tube with Throttle Valve Adapter replaces the failure prone OEM plastic charge tube with a fully machined, mandrel bent, and TIG welded assembly to fix the problem for good. This is the go to setup for shops and truck owners alike looking for the highest quality solution for an OEM tuned truck.

Intercooler Compatibility: This product was designed to work with the factory intercooler, and as such will work with aftermarket intercoolers that mimic the factory inlet / outlet locations. If you have an aftermarket intercooler that differs from that, please call for compatibility.

  • Replaces the restrictive failure prone plastic factory cold side charge tube
  • Fully TIG welded 3" mandrel bent steel tubing with machined IAT sensor port and two auxiliary 1/8" NPT ports.
  • Features optimum routing for best fitment
  • Includes a fully machined 6061-T6 throttle valve adapter that is anodized in our signature titanium finish for superior corrosion control Includes all new HD silicone connections and full stainless t-bolt clamps Proven to hold compound turbo system boost levels
  • Tested for over two years with Pusher's North American dealer network to ensure this is the best charge tube available 
  • Additional options include various powder coat colors, and extra ports.
Reviews

Reviews (16)

David Daigle Oct 4th 2022

Pusher intakes inner cooler cold tube

The fit is amazing and the quality of the product is second to none. I have no doubt this cold tube will preform superbly and won’t fail.

Fred E Ober Sep 13th 2021

Cold air intake tube with boots

Quality product and fast shipping . Thanks

Additional Info

Additional Info

SKU:
PFP1116BTA
Weight:
11.00 LBS
tooltip|powder-coat:
All steel products must be coated prior to installation. See “Powder Coating 101” under Articles for more information.
tooltip|Ports:
This product features 1/8" FNPT threaded ports for auxiliary sensors / injectors. Each port comes with an anodized aluminum plug so you can seal off ports not in use. The majority of our customers select the standard no port option.
Videos

Related Products