The Pusher Upper Coolant Tube converts the failure prone OEM rubber hose with plastic ends and plastic thermstat housing to a full aluminum and silicone assembly that can be color matched to any of your other Pusher parts.
Designed with extra clearance above the intercooler, the Pusher Upper Coolant Tube ensures improved fitment, especially with larger aftermarket intercoolers.
Proudly designed and built in Florida.
These pipes, clamps, and rubber connectors are of a quality that I really didn’t expect, and if you’ve watched you tube, A-Rod who recommends pusher piping kits, I knew they would be good, but it was hard to believe the full quality I was about to receive. Would I buy them again, you bet I would. Happy customer
It works great, the install was a bit difficult though. the 90 degree boot for the thermostat housing must have been a bit thicker rubber than the 20 degree. Had to remove the thermostat housing, install the boot and then take a pair of channel locks to squeeze the clamp enough to thread the nut on. This was after watching the install video and losing the clamp nut somewhere in the engine bay. My advice would be to get a longer T-bolt for the 90 degree. But all in all, I love it and I'm glad I replaced the OEM one, cause during removal, I noticed it was leaking at the thermostat cover as well as the inlet.
