Hot air pipe
Great luck easy fit really nice product
Hot side pipe
Fit and finish was perfect! Easy install and it looks amazing!
Inercooler piping
I have purchased both cold side and hot side pipes for my 2017 6.7 powerstroke. I bought the cold side a few years back after my factory one blew out. I use to be a traveling tig welder and hauled a 43' momentum toy hauler camper this product has changed my mind set about pulling. I don't have to worry about a boot blowing out they are heavy duty. I just wished now that I had bought the whole intake piping. Great product and thanks for the quick shipping.
Great Product
The quality on this is very good. I already have a cold side pipe from Pusher so it only made sense to get a matching hot side pipe.
Fits perfect
This fit my 2017 perfect. So much better than factory. No more worrying about the factory pipe blowing out of the rubber sleeve. I love the solid direct connect.
August 21, 2023
Great product and a perfect fit!
Hot & Cold Side Intake Pipes
Great fit from box to truck. Clear instructions. High quality product providing peace of mind running strong.
Hot side pipe
After doing a S&S cp4 my hot side keep blowing off, the factory thin boots would just slipped right off after I tighten and cleaned them. Pusher makes a great product, you have to arm wrestle them in place but they are on they are not going anywhere. I did both hot and cold side, they look nice.
Tight fit. No more worries.
I blew the stock hot side pipe off twice. I went with the pusher hot side and cold side pipes. The fit is beautiful and the quality of the product is outstanding. Customer support was also great! The appreciate prior military too!
Awesome
Great pipe very well made hold boost with no issues definitely will be buying from them
Hot side cooler pipe
This thing is cool as hell. The price is a little high but what isn’t these days. I’m glad I went with pusher. The quality is top notch!!
Extremely hard install, but looks and works great
It looks really nice and seals unlike my boost leaking factory unit. I wish I ordered the one piece, that might have made life easier. But as I've heard from another installer, getting the o-ring over the turbo outlet was damn near impossible. It took way longer than it should have and I would probably have to cut it off if I wanted to remove it. I'm a master tech with 20 years experience BTW. Definitely did not expect such a tough installation.
Single piece hot side pipe
This is the sturdiest designed hot side pipe I've ever installed. The boots is the strongest, and toughest boot I've ever installed on my trucks by far. The fitment was not as easy as the video portrayed and Pusher feel free to ask me questions about my install woes. The problem I ran into was the turbo connection with the o-ring to be specific it was to thick of an o-ring to slide on the turbo even after heavy lubrication. It took me and another Diesel mechanic to force this thing on. The reason I know it was the o-ring is because without it the pipe would click into place no problem. So whatever upgraded o-ring y'all developed needs to be reworked because I put a dent in my pipe using a hammer and a crowbar to convince this pipe to click on to the turbo. Once it was on though....geez is it not going anywhere. The oem pipe would move around easy but this one doesn't move even a millimeter. This thing makes me confident in turning up the boost I can't wait to get the rest of the system. I just really wish the o-ring was alittle bit thinner I guess so I could've put in on with out denting it.
Hot & cold side charge tubes
Directions and video lacked some details, my directions were only for cold side they did not have directions for hot side some parts seemed a little off on measurements not sure I also did not get a sticker with mine ha. Good product minus a few little set backs
Pusher Charge Piping and Intake Manifold Kit
Extremely happy with the fit and finish of all the Pusher parts for my 6.7. I purchased the complete intake manifold, charge piping, and intake as well as the coolant re route and everything worked out great and arrived quickly.
2015 hot side charge tube power stroke
Great fit easy install top quality product
Very happy overall
Looks nice! Instructions clear and simple but be prepared to fight getting the turbo side to go on! Mine and my buddy's '17 were a beast to get on! Maybe it was just those two but they were not easy to get to push on! I guess that means it's tight! I don't know how much better it performs than the factory one but I'm happy with my purchase! Told they had nothing ready to ship but would be a day or two to ship when I called, shipped next day!
These guys are awesome!
I have to say these guys are 100% the best, I called on a Tuesday asking for an intake kit Jacob said they needed to make one up for me but didn't have anything in stock, I had the box on my front porch by Friday. Perfect fit, looks amazing! The hot side charge pipe will fit so just keep pushing and when you think there's no way it's going to fit, push harder! Awesome customer service, awesome products, and awesome performance! Don't waste your time looking around trying to find something better, you're here, you found it, buy it!
Busted hot charge pipe
Quick response from order to ship, also staff was well informed about product. The new hot charge pipe is superior to the stock one and alot more "Heavy Duty" than I expected. I'm extremely pleased!
Amazing product amazing quality !!
The quality truely shows in your products
Pusher HD 3" Hot Side Charge Tube for 2015+ Ford 6
Work very well and the instructions were great.
great product
great intake kit, truly better than the rest, everything fits perfect and you can instantly feel the difference and performance from this kit, highly recommend this to anyone
Must have for all diesel trucks
Easy to install and with all the color options, this really cleans up the engine bay.
Looks great!
Huge improvement in looks! Not quite as easy to install, the guy in the video makes it look so easy!! It's a really tight fit to get it on the charger, but really a simple straightforward install.
hot side
Looks great easy install
Excellent product recommended
Hot side pipe
Adds to all the other cool looking pipes under the hood.
Hot side tube
Top quality just like the whole intake system I ordered previously. Super easy install. Definitely will be doing business with again.
Great fitment
Pipe fits and looks great. Was probably the hardest thing to install in the piping kit as the area is very clustered. Did not come with instructions but the video on their site let me know. Only thing that I needed it for was to know to know to reuse the clip from the original pipe. Otherwise its straightforward, just put it in where the old one was. Not that hard to figure out.
3" Hot Side Charge Tube
Came just like the Intake System. Wrapped and sealed ready to go. Powder coating all matches. It just completes the look of the system. Worth every penny.
charge tube
great product
Awesome
Easy to install and look great!
Also put Cold side on. Hope I got combo price?
Not as easy as Jacob does it but got it.
A must
Nice compliment to the pusher intake system, and a must for me in order to complete the full look inside the engine bay.
100% quality
You truly get what you pay for and the Pusher Intake system is top notch on workmanship, fit and finish. Not only is the powder coating great quality but it's 100 percent coverage inside and out on all the pipes. The gaskets and hardware are quality as well. The performance difference was immediately noticed. Cold and hot starts are quicker and throttle response is drastically improved. I wish I would have put this system on immediately after purchasing my truck.
Excellent product
Awesome product. I ordered the complete Intake system the fit and finish was better then described would definitely purchase again
Awesome!!
Very happy with the quality and looks awesome to boot.
Awesome product
Eady to install, looks great side by side comparison to stock is easy to see the flow difference. Only thing different is that I wish it was sold in a package with the complete kit.
Clean and Sleek!!
What a great way to get rid of extra leak points by doing away with an extra flex coupling and two clamps.
Highly recommend
This is the second Pusher part we have ordered, the quality is great, install is easy, and the shipping time in incredible. The blue color is so rich and clean as well!
Hot side charge tube
Directions were vague but the tube was super easy to install and it matches the entire system perfectly! Powder coating on all of the parts is flawless
Hot side tube
glad I got this with my intake system, makes for a super clean look.
Best in the BIZZ!
AGAIN ONE AMAIZING PRODUCT!
2016 Platinum Powerstroke
I orded the full piping kit including the hot side. Well there was a little hiccup in the parts....HOWEVER I sent a private message on FB msger and Jacob messaged me almost immediately to address the issue and even sent some goodies for the inconvenience. The truck runs awesome and turbo sound is superb.
Hot side pipe
Love it. I'm a mechanic at bare knuckles diesel in Texas and right when I got your parts I told my boss to become a dealer. So I also had him order the hole intake setup in white also. And i believe you guys are the only ones that have a tab for the oil and trans dipstick I love that. And I really like how easy all 8 10mm bolts are so Easy to get at.
buy hot side with intake and wife only yells once
Its a no brainer do it all at once and wife won't know the difference cause it comes in one Package, you will only get yelled at once for paying more attention to your truck, than her, plus if your gonna do something do it right! Im glad I did!!! looks great, performs great, install was a breeze.
Perfect
Powder coating was perfect on the pipe it fit right in with no problems
Hot side tube
Works great and looks good!