Pusher 3" Hot & Cold Side Charge Tubes for 2011-14 Ford F250/350 6.7L Powerstroke w/ Throttle Valve Adapter

$539.99
SKU:
PFP1114KTA
Weight:
18.00 LBS
tooltip|powder-coat:
All steel products must be coated prior to installation. See “Powder Coating 101” under Articles for more information.
tooltip|Hot-pipe-turbo-Connection:
Both options feature identical performance. The two-piece design allows for greater flexibility in fitment (extra coupler means extra wiggle-room, easier install) - whereas the tight tolerance of the single-piece is best only for stock trucks.
tooltip|Ports:
This product features 1/8" FNPT threaded ports for auxiliary sensors / injectors. Each port comes with an anodized aluminum plug so you can seal off ports not in use. The majority of our customers select the standard no port option.
Current stock: 0
Description

Description

What's the difference? Our One-Piece vs Two-Piece Hot Side Charge Tube  

Pusher 3" Hot & Cold Side Charge Tubes with Throttle Valve Adapter for the 2011-2014 Ford F250/350 6.7L Powerstroke Super Duty trucks.

Save $20 when you combine the Pusher 3" Hot & Cold Side Charge Tubes with our Throttle Valve Adapter. Replace your failure prone OEM plastic charge tubes with fully machined, mandrel bent, and TIG welded assemblies to fix the problem for good. This is the go-to setup for shops and truck owners alike looking for the highest quality solution for an OEM tuned truck.

 

The Pusher HD 3" Cold Side Charge Tube with Throttle Valve Adapter replaces the failure prone OEM plastic charge tube with a fully machined, mandrel bent, and TIG welded assembly to fix the problem for good. This is the go to setup for shops and truck owners alike looking for the highest quality solution for an OEM tuned truck.

Intercooler Compatibility: This product was designed to work with the factory intercooler, and as such will work with aftermarket intercoolers that mimic the factory inlet / outlet locations. If you have an aftermarket intercooler that differs from that, please call for compatibility.

 

The Pusher HD 3" Hot Side Charge Tube for the 2011-2014 Ford F250/350 6.7L Powerstroke replaces the restrictive factory hot side charge tube and its failure prone couplers with a fully TIG welded, mandrel bent, CNC machined steel charge tube and heavy duty silicone coupler with full stainless T-bolt clamps.

Intercooler Compatibility: The one piece configuration was designed to work with the factory intercooler and turbo, and as such will work with aftermarket intercoolers/turbos that mimic the factory inlet/outlet locations. If you have aftermarket parts that may differ, we recommend purchasing the two piece configuration or call for compatibility advice.  

  • Replaces the restrictive failure prone plastic factory cold side charge tube as well as the hot side
  • Fully TIG welded 3" mandrel bent steel tubing with machined IAT sensor port and two auxiliary 1/8" NPT ports
  • Engineered for optimum routing and best fitment
  • Includes a fully machined 6061-T6 throttle valve adapter that is anodized in our signature titanium finish for superior corrosion control
  • Includes all new HD silicone connections and full stainless t-bolt clamps proven to hold compound turbo system boost levels.
  • Tested for over two years with Pusher's North American dealer network to ensure these are the best charge tubes available
  • Additional options include various powder coat colors, and extra ports.

What’s in the box?

(1) FP11XXBT | Pusher 3" Cold Side Charge Tube
(1) FP1114HP | Pusher HD 3" Hot Side Charge Tube
(1) FP11XXTVA | Pusher 3" Throttle Valve Adapter
(1) PSR_3.75-3 | Pusher Silicone Reducer, Black 5-Ply
(1) FP1116S90 | Pusher Intercooler Outlet Coupler
(1) PSS3 x 4.6 | Silicone 3" Black 5-Ply, 4.6" Long
(5) TC_3 T-Bolt Clamp for 3" Silicone Couplers
(1) TC_3.75 | T-Bolt Clamp for 3.75" Silicone Couplers, Stainless Steel
(1) FP1114TVA | FP1114TVA O-Ring
(1) FP1116IAT_HD | Intake Air Temperature Sensor Bracket
(1) F67HP X-Ring | X-Ring for Ford 6.7L Compressor Outlet Adapter
(1) M5 x 08 x 10mm Button Head
(Optional) ⅛" NPT Port Plug | ⅛" NPT Port Plug (If purchased port option)

Reviews

Reviews (20)

Eddie Sep 24th 2024

Great fit, looks great

Been running both of these for about 2 weeks, after 250k truck is more receptive. Looking forward to upgrading some more parts. Very tight tolerances, but perfect fit! Thank you!

Cole Miller Jun 28th 2024

Great product

Once again an awesome product for a great price. Quick shipping as well

Additional Info

Additional Info

SKU:
PFP1114KTA
Weight:
18.00 LBS
tooltip|powder-coat:
All steel products must be coated prior to installation. See “Powder Coating 101” under Articles for more information.
tooltip|Hot-pipe-turbo-Connection:
Both options feature identical performance. The two-piece design allows for greater flexibility in fitment (extra coupler means extra wiggle-room, easier install) - whereas the tight tolerance of the single-piece is best only for stock trucks.
tooltip|Ports:
This product features 1/8" FNPT threaded ports for auxiliary sensors / injectors. Each port comes with an anodized aluminum plug so you can seal off ports not in use. The majority of our customers select the standard no port option.
Videos

Related Products