The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent 3” tubing. Not only is the engine bay cleaned up by this more efficient routing, the 9% shorter flow path delivers an 86% increase in airflow over the factory components it replaces. The design of this charge tube was purposeful; ours does not contact any of the surrounding engine bay parts as other designs have been known to do. Our design also eliminates the problematic curved factory coupler.

• Fully TIG welded with precise settings to produce beautiful welds and optimal penetration without impacting air flow.
• Includes heavy duty 5-ply silicone couplers and full stainless T-bolt clamps.
• Eliminates the problematic curved factory coupler at the inter cooler inlet. Does not rub on the driver-side inner fender or any other engine bay components like other designs tend to do.
• Additional options include various powder coat colors.

What’s in the box?

(1) GD0410HP | Pusher Max 3" Driver-side Charge Tube
(1) PSR3-225 | Pusher Silicone Reducer 3-2.25", Black 5-Ply
(1) PSS3x4 | Silicone 3" Black 5-Ply, 4" Long
(1) TC_2.25 | 2.25" Stainless T-Bolt Clamp
(3) TC_3 | 3" Stainless T-Bolt Clamp
(1) LLY_PSBL_Bracket | Driver-Side Brake Line Relocation Bracket
(1) M8 x 1.25 x 20mm Bolt