The 3.5" MEGA Intake System replaces all of the 3” factory pre and post intercooler plumbing and intake manifold with 3.5” mandrel bend tubing. It replaces all of your factory boots and clamps with heavy duty 5-ply silicone couplers and stainless T-bolt clamps.

• Like all Pusher intakes, this system is capable of being run with or without the heater grid.
• This intake system comes with instructions, heavy duty 5-ply silicone couplers, stainless T-bolt clamps, a OEM gasket and hardware, and port plugs.
• For an additional charge, select powdercoating colors are available on this system.

What’s in the box?

(1) DC9802MIM | Pusher 3.5" MEGA Intake Manifold
(1) DC9802MBT | Pusher 3.5" MEGA Driver-side Charge Tube
(1) DC9402MHP | Pusher 3.5" MEGA Passenger Side Inter Cooler Tube
(1) PSS_35 | Silicone 3.5" Black 5-Ply
(2) PS4535 | Pusher Silicone 45 Degree 3.5" Black 5-Ply
(1) PSR35-3 | Silicone Reducer 3.5-3" Black 5-Ply
(7) TC_3.5 | 3.5" Stainless T-Bolt Clamp
(1) 59C IMS Gasket | 5.9L Cummins Intake Manifold Gasket
(2) M8 x 1.25 x 95mm Stud
(3) M8 Locking Nut
(Optional) 1/8" NPT Port Plugs
(5) 5/16" Washers