Perfect fit!
Very well built cold side charge tube for my F250. I bought it as insurance knowing that the factory rubber tube is prone to blow out after a while. I have over 100k miles on my truck so I knew I needed to get one of these soon . I actually asked Grok AI who makes the best one and it said Pusher! So I bought one and installed it in less than an hour. The way it’s built, I’m sure it will last the life of the truck. And it looks great under the hood as well! I would highly recommend.
Awesome Upgrade
I've been wanting to replace the stock Cold Side Charge Tube for about a year now as a preventative upgrade. I'm so happy I finally got the chance. Ford will tell you they rarely fail but you can find frequent instances just asking around or on the internet. This gives me piece of mind hauling the family around on trips with our travel trailer knowing that at least we won't run in to this particular issue. I purchased the white gloss and it's a great color match which looks fantastic when I open the hood of my 2017 white Ford F350. I'm looking forward to upgrading the stock hot side charge tube next and eventually the air intake assembly. It's a great product.
Cold Air Charge Tube
My F250 hose cracked right where it is destined to do so. I canceled my order of an OEM replacement hose after researching aftermarket products. The install is absolutely doable even for a less than mechanically inclined guy. Gun Metal Grey is so hot. Just fits in and looks incredible. I appear to be getting 1 - 1.5 mpg better. Time will tell, but I recorded 19.1 mpg on my first full tank after install. I know, too good to be true, but so far.... Note: Your have to push hard to set that snap ring. I didn't get it set the first go. No other issues with install. Get the silicone spray and have an extension for the bottom intercooler connection and you'll be good. Very happy with this product.
Pipe
Looks great and much stronger than the stock system. I Highly recommend purchasing the silicone spray to help with install. Once the rubber ins put onto the metal it is so hard to get it to move I could not install with out it. In fact I had to go buy some in order to complete the installation....
Port opening
The charge air temp sensor port opening needs a bottom / floor added to minimize any piece of a broken sensor being Ingested into airflow
Great fit
It was time to retire the leaking ford unit. Great fitment, easy to install, instructions well laid out. Looks awesome under the hood!
2021 Ford 6.7L cold side
Great product. Looks great, well built, easy install. About to get the hot side next.
2017 F250 cold side pipe
Great quality product and extremely good customer service!
Cold side pipe for 6.7 powerstroke
Great alternative to the stock version. Once i get a few things on the truck i can add the full piping kit and sell this one.
Great product
Easy to install on my 2017 Superduty
Great Product - easily installed
I have a 2017 Superduty
Do it
I’m not a super mechanical guy . Uninstalled this in 1 Hr and a half . Took 30 min to mock up the tubes and install . Took my incompetent rear a hour to get the intercooler clamp on . My son and his small hands got it done . Trust me … easy
great product
Easy to install, the silicone sleeves are thick, tight, make sure you have some silicone spray and twisting seems to work better than push/pulling them on. Great fix
No more worries
One and done. I’m glad I listened to Jon and replaced the cold side along with the hot side pipe! Easy instal and I don’t worry about old rubber hose now!
Great customer service and they really appreciate prior military!
Pusher HD 3" Cold Side Charge Tube for 2017+ Ford F250/350 6.7L Powerstroke w/ Throttle Valve Adapter Pusher HD 3" Cold Side Charge Tube for 2017+ Ford F250
Great upgrade to factory radiator style hose.The product is top notch, the install takes time. It took me an hour of fidgeting around with the pipe to get it set in its correct position. I watched the youtube video and used the same silicone lubricant, however it drys quickly and the pipe cannot be moved around for very long after spraying. This caused me to have to pull the pipe out a few times to pull the boots out and re-spray them with silicone. I didn’t want any gaps in the boots due to incorrect positioning.
Easy, looks good, Good quality!
I'm happy with my purchase, looks good on the truck and is good quality! Easy install would recommend
Nice piece!
This is a well designed nice fitting piece. I wanted it to somewhat blend in so I went with the gun metal finish and it looks awesome. 10/10 recommend to keep from being stranded on the side of the road.
Great Product
I ordered this after I noticed a crack in my cold side before it blew and left me stranded. I ordered the black but last minute decided I want the titanium color. Called up and got it switched before it shipped with no problem. Install was quick and easy, had it done in less then 45 minutes. Will definitely order more later on down the road.
amazing fit and finish
everything about these cold side tubes are amazing. The tube fits better than factory, the welds are amazing, and all of the silicone couplers are race quality. Over all 5/5 stars!
Charge tube was as advertised, solid as had hoped.
Arrived early (always nice) Was easy to install and I have my hauler back
Excellent Parts!
Very high quality kit, well put together. Very clear color instructions for a easy and seamless install. Highly recommend!
